Clutchmasters Short Shift (or SS) series of billet aluminum clutch covers were designed to take a typical single disc clutch kit to that next level of performance. The goal of their engineers was to develop a clutch kit that was street friendly, allowed for faster shifts, lighter rotating mass, and the consistent pedal feel you expect from a clutch on the track. To accomplish this they took everything learned from decades of perfecting their Twin Disc clutch kits and designed it around the fitment of an OE style clutch cover.
Features of Short Shift Billet Clutch Kits:
- Shorter, faster, more precise shifts
- 10% lighter then OE stamped steel cover
- Fits stock single disc flywheel (or any aftermarket single disc flywheel designed for OE style clutch kits)
- Heavier diaphragm allows more clamping force to be obtained
- Modified pivot point on steel pressure plate casting makes pedal feel minimally heavier then a stock clutch.
- Works with factory hydraulics (For best results we recommend our internal hydraulic release bearing and master cylinder upgrades)
- Comes with new throw out bearing specifically designed to take advantage of the short throw of the clutch
- Available in several different disc material configurations for street or track use
The FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series.
Contains:
- Heavy-Duty Hybrid Disc with Fiber Tough Material on Pressure Plate side and Steel Backed Organic Friction Material on the Flywheel Side
- Fiber Tough and Steel Backed Organic Friction Material
- Heavy-Duty Sprung Hub (when applicable)
- Marcel Spring Wafer
- OEM or better Release Bearing
- Pilot Bearing (when applicable)
- Alignment Tool
- Instruction Card
- Decals
Notes:
-110% Increased Holding Capacity
-Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.
-Fitment note: Mid 2018 with VIN J*806877
