Whiteline Adjustable Front Sway Bar 24mm 2022-2024 WRX

Finish wise, the paint scrapes off very easily while installing, so use caution.

Fit wise, I did have to remove the two 17mm engine mount nuts and gently lift the engine with a board and jack in order to both remove the stock bar and install the new. Since I have a JDMuscle I-pipe, I did not have to remove the pipe. Just drop the passenger side first, then corkscrew out the driver side. When connecting my Fortune Auto end links, there was not enough clearance from the control arm for the soft setting, can only use the stiff setting. Ordered the Whiteline end links to see if that makes the soft setting useable.

I love how the front end feels after installing this front sway bar. A lot of people say you only need a rear sway bar to get the handling where it needs to be but I tried that and, while it did feel nice to have less roll in the rear, it honestly felt a bit unbalanced between front and rear.

Adding the front sway-bar really improved front-end-feel without introducing any understeer that wasn't already there.

My only issue with the product itself is that I had to grind the holes a little to get the stock endlink threads to fit. Not a huge deal to me but I want to be honest.

PSA: getting the bar inbetween the oil pan can be really difficult. It took me a while but what I did was rotated it to the exact orientation it needed to be when installed and just pushed up. I couldn't get it in any other way (sliding in from either side didn't work).