Skip to content
BLACK FRIDAY SALES ARE ACTIVE! - USE CODE "BFCM22" TO SAVE 10% ON HUNDREDS OF BRANDS!
BLACK FRIDAY SALES ARE ACTIVE! - USE CODE "BFCM22" TO SAVE 10% ON HUNDREDS OF BRANDS!

Radium Engineering PCV Side Fluid Lock Oil Catch Can Kit 2022 WRX

SKU 20-0754-FL
Save $12.00 Save $12.00
Original price $239.95
Original price $239.95 - Original price $239.95
Original price $239.95
Current price $227.95
$227.95 - $227.95
Current price $227.95

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modifications are required.

The PCV catch can kit runs inline between the PCV valve and the intake manifold and promotes clean filtered air back into the engine. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valves close and, thus, this hoses experience no flow. Conversely, the PCV hoses will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. 

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
J
Johnny WRX
Loving it!

Simple, easy to install. Thanks Subimods for the fast shipping as well.

Johnny,

Thank you for your 5 Star Review of the Radium Engineering PCV Side Fluid Lock Oil Catch Can Kit! This kit removes the oil and sludge from the PCV gasses before routing back into the engine. Being a closed system also keeps unwanted oil vapors from entering the cabin. Ultimately this kit helps keep your engine running clean, smooth, and at peak performance!

Regards,

J
James W.
Great catch can! Will not work with aftermarket airbox!

Catch can was easy to install and works as advertised. Only problem is this will not work with an aftermarket airbox (ETS), you will need to make a custom bracket and mount somewhere else (per Radium tech support)

James,

The Radium Engineering PCV Side Fluid Lock Oil Catch Can Kit for the 22 WRX is a great piece to prevent crankcase vapor, unspent fuel, and oil sludge from getting into the intake manifold! Thank you for your review and fitment information.

Regards,