On Most Orders Over $250*
On Most Orders Over $250*
DETAILS
The PERRIN Shifter Detent Kit is an inexpensive upgrade that adds a crisp and solid feel to gear changes in your manual transmission WRX. The PERRIN Shifter Detent Kit enhances gear shifting by providing a more defined feel for each gear position, including neutral. This upgrade delivers crisp, satisfying shifts, adding more enjoyment to driving your manual transmission Subaru!
The PERRIN Shifter Detent Kit increases the pressure on the OEM shift rod detents, resulting in more precise gear changes. Adding pressure ensures a more defined gear position with every shift, enhancing the overall driving experience.
Experience the difference immediately after installing the PERRIN Shifter Detent Kit. With an installation time of under an hour, you’ll enjoy years of enhanced driving pleasure in your manual transmission Subaru!
Features:
•Enhances gear shifting
•Provides a more defined feel for each gear position
•Increases pressure on the OEM shift rod detents
•Added pressure ensures a more defined gear position
•Install in under an hour
Made the gates feel more tactile and noticeably stiffer. Be patient and let them break in. They will be stiff at first.
Nigel,
Thank you for your 5 Star Review! We are glad to hear that our Perrin Shifter Detent Kit has improved the tactile feel of your gear changes. As mentioned, it may take some time for the kit to break in, but we're confident that you'll continue to notice the positive difference. Thank you for choosing Subimods!
Regards,
This is a great addition to any stock car or modified. There is a slight improvement to the shifting feel, but I think you can tell its installed. The install was pretty easy - this is a good cheap mod that anyone can do!
Alex,
Thank you for your 5 Star Review and for choosing our Perrin Shifter Detent Kit for your WRX. We are glad to hear that you haveve noticed an improvement in your shifting experience, even with just a slight difference. We are also happy to know that the installation process was easy for you. Thank you for recommending the shifter detent kit as a budget-friendly option for car enthusiasts. We appreciate your support and hope to serve you again in the future. Happy driving!
Regards,
Sucks to remove the last big bolt. I did it on a lift with a pry bar to move the trans over enough to fit the Allen in the bolt. If you’re going to do it on the ground good luck lol.
After installing I started regretting installing because the shifts were extremely heavy and hard to shift in and out so I almost uninstalled and reinstalled the old detents. Required way more effort.
Nothing positive about it lol.
After driving for a few days everything is seeming to become lighter and more positive feeling, but still notchy.
The big bolt is a 16mm and the small one’s are a 14mm.
I used an extra long flex head ratcheting wrench to get the big bolt tight.
I’d give it 5 stars if shifts weren’t so notchy and if installing wasn’t such a PITA.
Jordan,
Thank you for your detailed review! We appreciate your honest feedback and helpful tips regarding the installation process for the Perrin Shifter Detent Kit. It is valuable to know the challenges you faced, particularly with the tightness of the bolts and initial shift heaviness. We are glad to hear that it is starting to feel lighter and more positive after breaking in. Your insights will certainly assist others considering this mod. Thank you for sharing your experience and for your support!
Regards,
Rather simple installation. Be prepared with extra O-rings. The ones that come with the kit are a little too large and can easily get pinched during installation, causing them to break. I had to replace two of the O rings due to this issue. Also be ready for some oil to leak from the transmission when swapping out. Move quickly and you will only lose a few drops. The largest bolt (towards the rear of the car) was the most tricky to get out, but wasn’t too bad.
Once installed, the detents are much more noticeable and the transmission shifts with authority from gear to gear. If you like a more firm, positive shift feel, this modification is good. If you like a smooth easy shift, stay away.
Brad,
Thank you for leaving a review for the Perrin Shifter Detent Kit. We appreciate your feedback and we're glad to hear that the installation was simple for you. We apologize for the issue with the O-rings. We also appreciate the tip about the oil leak. We're happy to hear that the detents are more noticeable now and that the transmission is shifting with more authority. Thank you for choosing Subimods and we hope you continue to enjoy your improved shift feel. Have a great day!
Regards,
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}