On Most Orders Over $250*
On Most Orders Over $250*
DETAILS
Here, you are looking at the Molded Innovations Carbon Fiber Single Point Duckbill Trunk Spoiler. This is a great way to replace the factory wing with this sleek and aggressive low profile look that will not attract unwanted attention while maintaining a clean look.
Features:
Been running this duck tail for awhile now and i love the way it looks. Definitely stands out and is an eye catcher for sure! If you want compliments, this is the way to go. Worth every penny in my opinion!
Thank you for your 5 Star Review, Derek.
We are thrilled that the Molded Innovations Duckbill Spoiler has been an eye-catching and stylish addition to your car. Your feedback and compliments mean a lot to us!
Regards,
I own 2015 WRX and the OEM spoiler was getting bad rash with the clearcoat starting to crack and fleck off after 8 years So I upgraded to this and was definitely glad I did. It looks great and gives a nice contrast against my WR Blue color and looks massively better than the stock OEM black parts.
I opt'ed for using 3M Double-sided tape instead of the included adhesive as wasn't sure how it would impact the paint/clearcoat. You cannot use the factory OEM mount holes after removing the factory spoiler. Be prepared to clean that area thoroughly and have some way to seal the 5x OEM holes that will be left behind. I used high-strength electrical tape and it seems to hold up well to rain and car washes so far.
Make sure you properly align and do dry runs of attempting to see the duckbill on before going for the actual attempt. (IE: make sure you get the angle right so when placing it so rear of the trunk is flush with the duckbill)
Do not underestimate the strength of 3M tape otherwise you will risk cracking the spoiler, so set it on the car lightly first and making sure its flush all around before giving it some applied pressure to ensure adhesion.
I noticed after installation that a small area on my passenger side of duckbill rests JUST slightly high enough so its not making full contact with the 3M double-sided tape, or the tape is not 'thick' enough. It could just be my car, but food for thought when prepping install that you may need to double up.
tl;dr 10/10 product I love it and its fantastic upgrade visually, install isn't bad just be careful and methodical.
Thank you for your 5 Star Review, Sean.
We are glad that the Molded Innovations Carbon Fiber Single Point Duckbill Trunk Spoiler was a stylish upgrade for your 2015 WRX and offered a significant aesthetic improvement over the OEM spoiler. Your detailed feedback on the installation process and tips for using 3M double-sided tape will be valuable for other customers. We are pleased that you love the final look and functionality of your new spoiler.
Regards,
great product
Dennis,
Thank you for leaving a 5 Star Review! We are thrilled to hear that you are happy with your Molded Innovations Carbon Fiber Single Point Duckbill Trunk Spoiler for your WRX/STI. We appreciate your support and hope it adds a touch of style to your vehicle. Thanks again for choosing Subimods!
Regards,
Raynal,
Thank you for your 5-Star Review of the Molded Innovations Carbon Fiber Single Point Duckbill Trunk Spoiler! This spoiler is a simple way to turn heads! It looks fantastic and installs simply with double-sided adhesive! Enjoy the new look!
Regards,
Exactly as described. Love the look of this on my WRX. Used some additional 3M tape not provided but probably unnecessary.
Jared,
The Molded Innovations Carbon Fiber Single Point Duckbill Trunk Spoiler is an awesome look for the WRX/STI! This full carbon fiber wing is a fantastic replacement to the factory wing giving you a unique look! Although not necessary you can't go wrong with a little added protection! Thank you for your 5 Star Review and added pic!
Regards,
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}