ETS Muffled Axle Back Double Wall Stealth Black Tips 2022-2024 WRX
▶ Vehicle Fitments
| Year | Make | Model |
|---|---|---|
| 2022 | Subaru | WRX |
| 2023 | Subaru | WRX |
| 2024 | Subaru | WRX |
| Year | Make | Model |
|---|---|---|
| 2022 | Subaru | WRX |
| 2023 | Subaru | WRX |
| 2024 | Subaru | WRX |
DETAILS
The ETS Axle-back exhaust for the 2022+ WRX utilizes a full stainless steel construction. The axle back is 2.5" that mates to the stock 2 bolt flange. All gaskets are included to aid in ease of installation. This is the easiest way to get a little bit more noise and performance out of your new WRX!
The ETS Muffled Axle back is the quieter of the offerings from ETS. This product is designed for customers who are looking for a mild upgrade in sound, if your stock system is a 1 in terms of scale this system will fall somewhere between the 4-5 position on the sound scale! The sound of an axle back is greatly affected by the components that come before it as well, any adjustments to the downpipe and or mid pipe will increase the overall exhaust note as well so be sure to keep that in mind when making your selection!
Features:
I was searching for a simple, axle back exhaust to give my VB a little more rumble and volume while being cost efficient as it's a lease - this is the perfect balance of all. Love the tone, the volume and practically no drone. Makes the car MUCH more enjoyable to drive and the black stealth tips look killer as well. Super happy with the results.
Hello,
Thank you for the review. Great to hear you found the perfect balance in tone and volume and are enjoying the upgrade.
Regards,
This axleback adds quite a bit of volume for being muffled. I do wish it was a little bit quieter, and because of a slight drone around 2k I'll probably add the resonated mid pipe at some point anyway. Still an awesome product, easy install, sits perfect, low boxer rumble, and if I was 15 years younger the volume would be perfect.
Hello,
Thank you for the review. Great fitment and sound with that classic boxer rumble.
Regards,
I put these on in less than 15 minutes with hand tools and a basic impact to remove bolts easier. I used a squirt of WD40 on the hangers before removal of the stock mufflers, another quick squirt once they were off to lube the inside of the holes, new ones went on easy. I did reuse my stock hardware (bolts and nuts) as they are a bit heavier grade. It sounds great, not too loud at all, sounds like a proper Subi now. I went with the black tips, looks good with the dark rear bumper panel. Yes, it is louder on cold starts, but that only lasts a minute. Dang near silent at idle, but sings when you wind it up. No drone, none. Would recommend for those wanting a good sound, but don't want obnoxious noise.
TRBOLVR,
Thank you for taking the time to leave your 5 Star Review! We are thrilled the ETS Muffled Axle Back brought the sound and look you wanted. Your install tips are spot on too – thank you for sharing!
Regards,
Cold start is a little loud but nothing to wake the neighborhood up over, deep tone to the rumble, 10 minute install, warranty intact (hopefully).
David,
Thank you for your 5 Star Review on the ETS Muffled Axle Back with Stealth Black Tips. That deep rumble is the perfect touch—subtle, but aggressive. Quick install and a satisfying tone, we love to hear it! 🔥
Regards,
I bought this axel back because I wanted deeper sound to my car, and this surely delivers. I'll admit it is a little louder than I'd like for cold starts, but that's to be expected. Sounds great at temperature. Install was easy. I would recommend ramps to help you work underneath as well as some WD to help with installing/uninstalling of sliding in/out of the rubber supports. This was the only tricky part. I also used stock bolts on install due to them seeming to be a little thicker.
Curits,
Thank you for your 5 Star Review. We are delighted that you enjoy the deeper sound of your exhaust and found the installation manageable. Your tips for installation will surely help others.
Regards,