
On Most Orders Over $250*
On Most Orders Over $250*
DETAILS
The COBB catback exhaust for the WRX does not deviate from the factory emissions equipment and conforms to the SAE dictated 95-decibel exhaust noise level limit enforced by California, as well as other states in the US. This system is modeled after the stock factory exhaust fitment locations, therefore making it an easy direct bolt on item inclusive of all needed gaskets and hardware.
The COBB Tuning catback exhaust is heralded often for its quality, performance, and subtlety. Engineered to be a vehicle specific unit, the catback exhaust uses the highest quality stainless steel piping and a muffler designed for direct and efficient flow of exhaust to achieve the highest performance while still retaining a stock like appearance and sound level.
Features:
Subaru SS 3" Cat-Back Exhaust WRX 2022-2024
The entire system is constructed of 304 stainless steel and is meticulously TIG welded for outstanding appearance and durability. At the front, a high quality cast flange is machined to accept the factory donut gasket for leak-free installation. From there, 3" stainless steel tubing runs all of the way back to another 3" cast flange where it meets the y-pipe. A flex section in this pipe adds compliance to the system. The y-pipe in this exhaust system consists of a 3" tube that is divided into twin 2.5" tubes by way of an all new cast split section. This cast section improves durability and longevity when compared to other welded splits. All three connections of the y-pipe section are made with high quality cast flanges which resist distortion and allow for a leak-free installation.
As with the rest of the system, the muffler sections connect to the y-pipe section using high quality cast flanges. The heart of this exhaust system are two all new bespoke COBB designed mufflers. These new muffler sections feature a single 2.5" inlet and dual 2.5" outlets that accept slip-on 3.5" dual wall, slash cut tips with laser etched COBB logos.
Multi-layer steel (MLS) gaskets are included for all connections to ensure a secure, leak-free installation. All of these features add up to a premier cat-back exhaust for your VB Subaru WRX. The exhaust note is crisp and noticeable over stock without introducing unwanted drone in cabin.
The y-pipe in this exhaust system consists of a 3" tube that is divided into twin 2.5" tubes by way of an all new cast split section. This cast section improves durability and longevity when compared to other welded splits. All three connections of the y-pipe section are made with high quality cast flanges which resist distortion and allow for a leak-free installation.
At the front, a high quality cast flange is machined to accept the factory donut gasket for leak-free installation. From there, 3" stainless steel tubing runs all of the way back to another 3" cast flange where it meets the y-pipe. A flex section in this pipe adds compliance to the system.
I am happy with this exhaust. It sounds nice, and it looks good. It was not hard to install. Most of my effort was just getting the car up on jack stands. One of my clamps for the tips was broken, and I emailed COBB and they sent me new ones right away, so good manufacture customer service.
Duderino,
Thank you for your 5 Star Review! We are thrilled that you are happy with your COBB Cat Back Exhaust and that it looks and sounds great. It is also good to hear about COBB's excellent customer service. Let us know if you need assistance with future upgrades!
Regards,
The quality of this exhaust is amazing. Clean welds, amazing flanges, and great fitment. Installation took about an hour from start to finish. All materials were included in the kit. Sound is slightly louder than stock at cold start and idle but when you get on the throttle, you can finally hear the exhaust!
Brad,
Thank you for your great 5 Star Review! We are so glad to hear that you are loving your new COBB Cat Back Exhaust. The Subimods Team takes pride in providing high-quality products! We hope you continue to enjoy the improved sound and performance of your WRX. Thank you for choosing Subimods!
Regards,
Expected nothing less than perfection from Cobb. Easy install, was harder getting my lowered car off the ground than it was putting this exhaust on. Welds were perfect. Not a very loud exhaust on its own, but I’m sure after more bolt ons and a tune it will really wake it up. Car was instantly more responsive. Love hearing the Subie rumble.
Megan,
Thank you for your 5 Star Review and added pic of the COBB Cat Back Exhaust for the 2022-2023 WRX. We are delighted to hear that the installation was straightforward and that you appreciate the quality of COBB products. COBB is one of the top leaders in the industry and they develop top quality products! It is great that you have noticed improved responsiveness and are looking forward to the potential for a more pronounced exhaust note with additional modifications. We appreciate your support and hope you continue to enjoy the enhanced performance of your Subie!
Regards,
Fit and finish is amazing. Quality exhaust but then again it is a Cobb product
Thomas,
We appreciate your 5 Star Review! We are glad that you are pleased with the COBB Cat Back Exhaust for your WRX! COBB is known for producing high-quality products, and their exhaust systems are no exception. The excellent fit and finish ensure a seamless installation, while the stainless steel construction ensures durability and longevity. Enjoy the enhanced sound and performance that this exhaust brings to your vehicle. Drive on and enjoy your COBB exhaust!
Regards,
The quality of this exhaust is amaaaaazing. Cold start is loud. You will get that on any aftermarket exhaustion. No issues, light drone at 2k and not too obnoxious. Love it. I got with titanium tips and looks great.
Andrew,
Thank you for taking the time to leave a 5 Star Review and additional video of the COBB Stainless Steel Catback Exhaust! COBB is known for their quality parts and modifications! It is an easy installation that sounds and looks amazing! Enjoy!
Regards,