By upgrading the soft stock suspension bushing with a harder unit will take the slop out of your suspension. A harder bushing will not deflect as much during hard use keeping the control in its optimal position. Included with the kit is both the front inner bushings, your control arms will need to be removed from the vehicle to have the old bushings pressed out. The new bushings are 2 piece making for easy installation into the control arm. These will transfer more noise and vibration into the cabin so they are not for the faint of heart.
Good Quality Review by Robert
Fits snug and handles well. It is a pain to push out the old bushings. The press at the hobby shop did not have the right setup (not Whitelines fault). Took some careful air hammering to get out. The install was easy and took a bit of wiggling and installed great. (Posted on 7/1/2016)
Subimods.com provides fitment information provided to us by the manufacturer. However, please make sure the product you are purchasing will fit your year, make, & model Subaru. For example, one product may fit only a 2002-2004 WRX, but also fits a 2005-2007 STI. This same product may not fit a 2005-2007 WRX. Either way, the product will list the fitment years as follows: 2002, 2003, 2004, 2005, 2006, 2007. So please be sure the product will fit your specific application. The majority of the products listed on our site will have the year, make, & model fitment information directly in the product title. Subimods.com will not be held liable for purchases made for the incorrect application, and a restocking fee may be required. If you have any questions, PLEASE contact us before making your purchase. Our knowledgeable staff will be happy to assist you!