{"product_id":"radium-engineering-fuel-hangar-for-use-w-walbro-fuel-pumps-nissan-s13-240sx-and-silvia-nissan-r32-skyline-except-gtr","title":"Radium Engineering Fuel Pump Hangar For Use w\/ Walbro Fuel Pumps Nissan S13 240SX and Silvia \/ Nissan R32 Skyline (Except GTR)","description":"\u003cp\u003e\u003cspan\u003eThis Radium Engineering fuel pump hanger replaces the stock fuel pump module in the Nissan vehicles listed above. It can be configured with 1, 2, or 3 aftermarket fuel pumps to meet the fuel demands of various high performance engines. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003cbr\u003e\u003cbr\u003eThe fuel pumps are positioned in the factory collector bowl. Fuel is drawn in through the mesh filter located at the bottom of the assembly. As shown below, fuel cannot pass between the 3 independent filtration chambers (A, B, C). If less than 3 pumps are installed, the empty port does NOT need to blocked off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe functionality of the factory Nissan fuel level float and low fuel switch are retained. The fuel pump outlets merge into a single 8AN female port on the top plate. And because of the integrated check valves, fuel pump staging is permitted. The return port also uses a 8AN ORB female port on the top plate.\u003cbr\u003e\u003cbr\u003eAdapter fittings are included for easy connection to the factory fuel lines. Also included in all variations of the kit are adapter fittings for connecting aftermarket AN style hoses. The fitting ports are machined low enough to clear the unibody sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrop-In Installation\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMerged 8AN ORB Female Pump-Out Port\u003c\/li\u003e\n\u003cli\u003eBarbs and 6AN\/8AN Fittings Included\u003c\/li\u003e\n\u003cli\u003e8AN ORB Female Return Port\u003c\/li\u003e\n\u003cli\u003ePermits 1-3 Aftermarket Pumps\u003c\/li\u003e\n\u003cli\u003eCompatible with Various Pumps \u003c\/li\u003e\n\u003cli\u003eHigh Current Electrical Hardware\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware and Clamps\u003c\/li\u003e\n\u003cli\u003eGasoline, Methanol, and E85 Compliant\u003c\/li\u003e\n\u003cli\u003eNew Anti-rotation Electrical Terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePump Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are many different combinations of fuel pumps available described below. Choosing the pump(s) is based on the expected engine power output and the fuel type (gasoline, E85, etc.) The kit will have enough parts to run 1, 2, or 3 fuel pumps, but the user must supply their own compatible fuel pumps and some assembly is required. The following fuel pumps are compatible:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWalbro F90000267\u003c\/li\u003e\n\u003cli\u003eWalbro F90000274\u003c\/li\u003e\n\u003cli\u003eWalbro F90000285\u003c\/li\u003e\n\u003cli\u003eProtec 11928\u003cspan\u003e\u003csup\u003e(3)\u003c\/sup\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuelab 49614\u003cspan\u003e\u003csup\u003e(3)\u003c\/sup\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDeatschwerks DW810\u003cspan\u003e\u003csup\u003e(3)\u003c\/sup\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003csup\u003e(3)\u003c\/sup\u003eThese pumps do NOT fit into the included pump strainer. Part number 13-1187 is required to use these pumps. You can order it from the optional parts on the right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting.\u003c\/p\u003e\n\u003cp\u003eElectrical hardware is included for the fuel pump(s) and sensors. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.\u003c\/li\u003e\n\u003cli\u003eUniversal fuel pump wiring kits can be found \u003ca href=\"https:\/\/www.radiumauto.com\/products\/diy-fuel-pump-wiring-kit\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. Select one for each aftermarket pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/4193\/7449\/files\/19-0247.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/h4\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46198223208623,"sku":"20-0732-00","price":427.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/3598\/4815\/files\/radium-engineering-fuel-pump-hangar-for-use-w-walbro-fuel-pumps-nissan-s13-240sx-and-silvia-nissan-r32-skyline-except-gtr-20-0732-00-1261662.webp?v=1762397708","url":"https:\/\/subimods.com\/products\/radium-engineering-fuel-hangar-for-use-w-walbro-fuel-pumps-nissan-s13-240sx-and-silvia-nissan-r32-skyline-except-gtr","provider":"Subimods.com","version":"1.0","type":"link"}