Subimods 2015 WRX / STI / LGT 100% Plug & Play Hella Horn V2 Wiring Harness
Subimods is happy to announce our redesigned v2 wiring harness for the 2015+ Subaru model vehicles. We thank all of our customers for there patience while we assembled the most well put together Wiring Harness for your new WRX / STI / LGT. As many of you know the 2015 WRX / STI / LGT models came with a completely new specialty sealed horn connector. Where other companies have fallen short we have taken the time to make our wiring harness 100% plug and play. That means no cutting, splicing, taping, or assembly required by you! Our waterproof relay, fully sealed nylon braided exterior and high quality heat shrink connectors mean our product is resistant to all elements and will allow you to provide years of piercing loud supertones!
Once we received our 2015 STI we were so eager to install our Hella Horns, we got the bumper off and realized that the horn connector was completely different. What was once a standard male spade connection, had been replaced by a molded specialty sealed connector. Heartbroken, we began looking into ways of adapting our current generation wiring harness to work with the 2015 Chassis. With multiple attempts at adapting the chassis wiring, removing the sealed connector, and trying simpler connections to mate to the connector we were left with only choice; Locate the male side of the horn connector.
We began what we assumed would be a very quick process, locate the male end of the horn connection! We sifted through hundreds of listings for specialty sealed connectors to no avail. Finally we had a breakthrough we located the female end of the plug (Chassis Side) we believed that since we had one side we could find its mate rather quickly.. After some more research we ran into a bit of an issue; There was no mate! It didn’t exist. We were left with only one option which was to have the connector custom injection molded. This process was slightly tedious, but we have constructed a true plug and play solution. So we thank all of our customers for there patience while we created this product from scratch.
Ours vs. The Competition
Other manufactures have released a harness for the 2015+ chassis, but they fall very short on quality compared to the Subimods v2 Wiring Harness. The first problem we noticed with other manufactures harnesses was that they were not truly plug and play; they used basic pin connections that required use of electrical tape or heat shrink to rudimentarily seal the trigger wire connection. Secondly they used basic relay setups and were not fully sealed. All of these shortcomings lead to a product that is prone to damage from the elements over time and rather basic. Our Subimods v2 Harness picks up where all these other inferior pieces left off! With our new molded connector we can ensure that there is no extra work needed by the end user. Our waterproof relay, fully sealed nylon braided exterior and high quality heat shrink connectors mean our product is resistant to all elements and will allow you to provide years of piercing loud supertones!
• Waterproof Hella Relay / Socket
• High quality heat shrink connectors
• High quality inline fuse holder with a standard 20amp fuse included
• Fully sealed nylon braided exterior
• 2015+ Molded Horn Connector
• No cutting, splicing or electrical tape needed!